Flare Type Solenoid Valves

Flare Type Solenoid Valve

The solenoid valve is an automatic control parts used in liquid line, suction line and steam line of refrigeration system to control the refrigerant to pass or not pass, the valve is wide used in refrigeration compressor group, central air-conditioning, coldstorage equipment and bus air-conditioning system.

Technical Parameters of Solenoid Valve:

Suitable Refrigerant	R12,R22;R134a,R404,R407C,R410,R502
Media Temperature	-30°C ~+105°C
Service	100,000 cycles
Working Pressure	3.0Mpa
Solenoid Coil	DC12V,DC24V,AC110V,AC220V,AC380V
Solenoid Power	8W
Allowable Voltage Fluctuation	+10% ~ -15%

Descriptions of Solenoid Valve:
SH series Solenoid Valve is a kind of normally closed, two-channel trait ,actedas a pilot valve, it usually is applied in the liquid refrigerant or exhaustingair and water or compressing air etc.

Features for Refrigeration Solenoid Valve SH Type & SHF Type:
1. Nut with O ring ensures watertight performance andstrengthens the watertight performance of the coil.
2. The elaborately designed coil winding conforms to CE161-lstandard and able toremain functioning under extreme conditions.
3. The coil winding can be fitted with plug-in connector, which is configured withthree wires and can be connected very easily.
4. Electromagnetic coil employ moisture-proof resin windings, which possesseswater-proof and shock resistant characteristics.
4. There is no need to shut systematic pipe line when replacing the electromagnetic coils.
5. The valve can evaporate normally, be opening or closing, under the conditionthat there is no pressure differential of the refrigerant media.
6. Working Temp.:-30℃~+105℃.
7. 24V, 110V, 220V and 380v electromagnetic coil are available andplease inform us of that when placing order.
8. Substitute for congeneric import products like DANFOSS, CASTEL, PARKER, EMERSON, SAGINOMIYA.

Solenoid Valve Flare Type & Solder Type:

Specifications of Refrigeration Solenoid Valve:

Model	Operating Principles	Port Size (mm)	Connection Size			Opening Pressure Differential (Bar)		KV factor (m³/h)
			SAE(in)	ODF
				in.	mm	Min.	Max.
SH-1020/2 SAE	Direct Acting	2.5	1/4"	-	-	0	21	0.175
SH-1020/3 SAE			3/8"	-	-			0.23
SH-1028/2 ODF			-	1/4"	-			0.15
SH-1028/3 ODF			-	3/8"	-			0.23
SH-1064/3 SAE	Diaphragm Pilot Operated	7.0	3/8"	-	-	0.05		0.80
SH-1064/4 SAE			1/2"	-	-
SH-1068/3 ODF			-	3/8"	-
SH-1068/4 ODF			-	1/2"	-
SH-1070/4 SAE		12.5	1/2"	-	-			2.20
SH-1070/5 SAE			5/8"		-			2.61
SH-1078/4 ODF			-	1/2"	-			2.20
SH-1078/5 ODF			-	5/8"	16			2.61
SH-1078/6 ODF				3/4"
SH-1079/7 ODF				7/8"	22
SH-1098/6 ODF		16.5		3/4"				4.80
SH-1098/7 ODF				7/8"	22			5.70
SH-1099/9 ODF				1-1/8"
SH-1078/9 ODF		25.5		1-1/8"				10
SH-1079/11ODF				1-3/8"	35